Is your garage door acting Up? Check out our top ten reasons why you might be dealing with a broken garage door spring. If you notice any of them, contact universal garage door repair specialist in your neighborhood.
A Loud Bang in the Garage
If you’re standing in the kitchen and hear a loud bang coming from the garage, it might be the torsion springs in the door. The spring breaks and the coils come in contact with the shaft under tremendous forces. As a result, you hear a loud bang that takes you by surprise.
When the springs give out on the garage door, it causes issues with the cables. The cables are one of the first things a garage door specialist checks when assessing the damage of the door. when the spring breaks the cables can get caught between the gap of the door after disconnecting from the pulleys.
There Is a Significant Gap in the Spring
If you look at the torsion springs on your garage door and find that there’s a significant gap somewhere in the coil, you have a problem. If the gap is larger than 2-inches, then you can expect your door to fail at any time. Don’t get caught out, contact a garage door repair specialist.
Garage Door Stops 8-inches after Opening
When leaving the garage, the door might stick a few inches after starting to open. Unfortunately, it’s the sign of a bigger issue with the door. The damaged spring causes an imbalance in the independent movement of each side of the garage door. As a result, it activates the force sensor, causing it to stall.
Garage Door Free Falls When Closing
You might notice that your door starts to free fall a few seconds after closing. This problem occurs due to a broken garage door spring. The unbalanced weight causes issues with the motor, creating an imbalance as the door unrolls or moves into place.
A Bend in the Top Panel of the Door
If you find a bend in the top corner of the door, it’s a sign that you are dealing with a broken garage door spring. This situation typically occurs when the dial for the “open force” of the door is at maximum level on the controller circuit board. The force sensor is a safety mechanism to help homeowners know when they need to get the door serviced. Contact your garage door specialist for an estimate on fixing or maintaining your door.
The Door Jerks When Moving
If the door starts to jerk and appear stuck, it may be an imbalance in the tracks. A broken garage door spring is often the cause of the problem, creating an imbalance in the sides of the door. As a result of the broken spring, the door sticks as it rolls up the guide, causing the shuddering effect.
Pulling the Emergency Release Rope Does Nothing
Every garage door opener comes with an emergency release red cord that allows the home owner to release the garage door from the opener. If after releasing the red cord, you try to lift the door manually and it does not move, you have a broken spring.
The Pulley and Cables Are Hanging
Garage doors featuring extension springs may notice the signs of a broken spring when they find the pulleys hanging. Extension springs rely on a two-pulley set up on either side of the garage door to help to lift the door up. If the spring snaps the cables twist or frayed when they catch on the steel track edge.
The Garage Door Looks Tilted When Moving
This situation occurs because the extension springs break, causing issues with the independent stretch of the springs. If one side should break, then the other side has to do all of the work, resulting in a tilting effect when opening or closing the door.
Contact universal garage door repair specialists for assistance.